HP CP4525DN Laser CC494A#ABA manual Reinstall the lifter base assembly

2.From inside the Tray 2 cavity, remove four screws, and then remove the lifter base assembly.

NOTE: Pull the assembly straight from the product without tipping to prevent the spring from falling from the assembly.

Reinstallation tip If the tray does not completely close when reinstalled, push on the lever in the opening (callout 1) with a flat blade screwdriver to reset the spring in the closing mechanism.

Figure 2-158Remove the lifter base assembly (2 of 2)

1

Reinstall the lifter base assembly

If the spring falls from the lifter base assembly, reinstall it in the lifter before reinstalling the lifter base assembly.

1.Make sure the black rubber end is seated on the spring. Figure 2-159Reinstall the lifter base assembly (1 of 2)

176 Chapter 2 Removal and replacement ENWW