HP CP4525DN Laser CC494A#ABA manual Remove the laser/scanner assembly Y/M

Remove the laser/scanner assembly (Y/M)

NOTE: After installing a new laser/scanner assembly, be sure to calibrate the product. See Calibrate the product on page 313.

1.Release one spring.

CAUTION: The spring is not captive. Do not lose the spring when it is removed. Use a pair of needle-nose pliers to safely retain the spring when it is removed. Do not use a flat blade screwdriver to remove the spring; the spring could forcibly leave the product and strike you.

Figure 2-175Remove the laser/scanner assembly (Y/M) (1 of 5)

2.Disconnect one connector.

Figure 2-176Remove the laser/scanner assembly (Y/M) (2 of 5)

ENWW Internal assemblies 187