HP CP4525DN Laser CC494A#ABA manual Storage Error Settings, Changed, 8X.YYYY EIO Error

Table 3-14Control-panel messages (continued)

Description Recommended action

68.X PERMANENT STORAGE WRITE FAIL To continue press OK

The product NVRAM is failing to write. Printing can continue, but some unexpected functions might occur if an error occurred in permanent storage.

Press the OK button to clear the message. If the message is not cleared, turn the product off, and then turn the product on.

X values

● 0 = Internal memory ● 1 = Removable disk

68.X STORAGE ERROR SETTINGS	One or more product settings are invalid and	Press the OK button to clear the message. If
CHANGED	have been reset to the factory-default	the message is not cleared, turn the product
To continue press OK	settings. Printing can continue, but some	off, and then turn the product on.
	unexpected functions might occur if an error
	occurred in permanent storage.
69.X ERROR	A temporary printing error occurred.	Turn the product off, and then turn the
To continue turn off then on		product on.
79.XXXX ERROR	An internal product error has occurred.	Turn the product off and then on.
To continue turn off then on
8X.YYYY EIO ERROR	This message appears in English only. It	Replace the EIO card.
	indicates that the EIO card in slot X has failed.
8X.YYYY EMBEDDED JETDIRECT ERROR	This message appears in English only. It
	indicates that the embedded HP Jetdirect
	card has failed.

<COLOR> CARTRIDGE VERY LOW To continue press OK

The product indicates when a supply level is Order the indicated print cartridge. low. Actual print cartridge life might vary. You

do not need to replace the print cartridge at this time unless print quality is no longer acceptable.

ACCEPT BAD SIGNATURE?	The product is performing a remote firmware	Download the correct firmware upgrade file
Yes press OK	upgrade, and the code signature is invalid.	for this product, and then reinstall the
		upgrade. See the product user guide for more
alternates with		information.
ACCEPT BAD SIGNATURE?
No press
Access denied MENUS LOCKED	The control-panel menu that you tried to	Consult with the person who administers the
	select is currently locked.	product.
Action not currently available for tray x	Duplex registration is not available when the	Configure the tray to a specific size, and then
Tray size cannot be ANY SIZE/ANY	size is set to ANY SIZE or ANY CUSTOM.	set the registration for that tray.
CUSTOM
BAD OPTIONAL TRAY CONNECTION	The optional tray is not connected correctly.	1.	Turn the product off.
		2.	Remove and then reinstall the optional
			tray.
		3.	Reconnect the connectors for the tray.
		4.	If the problem persist, replace the
			connector for tray.

356 Chapter 3 Solve problems ENWW