HP CP4525DN Laser CC494A#ABA IPV4 Settings Config Method Bootp, Dhcp, Auto IP, Manual, Default

Table 3-13Embedded Jetdirect menu (continued)

Item	Sub-item	Sub-item	Sub-item	Description
	IPV4 SETTINGS	CONFIG METHOD	BOOTP	Specifies the method that TCP/IPv4
			DHCP*	parameters will be configured on the
				HP Jetdirect print server.
			AUTO IP	Use BOOTP (Bootstrap Protocol) for
			MANUAL	automatic configuration from a BootP server.
				Use DHCP (Dynamic Host Configuration
				Protocol) for automatic configuration from a
				DHCPv4 server. If selected and a DHCP
				lease exists, DHCP RELEASE and DHCP
				RENEW menus are available to set DHCP
				lease options.
				Use AUTO IP for automatic link-local IPv4
				addressing. An address in the form
				169.254.x.x is assigned automatically.
				If you set this option to MANUAL, use the
				MANUAL SETTINGS menu to configure
				TCP/IPv4 parameters.
		MANUAL	IP ADDRESS	(Available only if CONFIG METHOD is set to
		SETTINGS	SUBNET MASK	MANUAL) Configure parameters directly
				from the product control panel:
			DEFAULT	IP ADDRESS: The unique IP address
			GATEWAY	(n.n.n.n) of the product, where n is a value
				from 0 to 255.
				SUBNET MASK: The subnet mask (n.n.n.n)
				for the product, where n is a value from 0 to
				255.
				DEFAULT GATEWAY: The IP address of the
				gateway or router used for communications
				with other networks.
		DEFAULT IP	AUTO IP*	Specify the IP address to default to when the
			LEGACY	print server is unable to obtain an IP address
				from the network during a forced TCP/IP
				reconfiguration (for example, when manually
				configured to use BootP or DHCP).
				NOTE: This feature assigns a static IP
				address that might interfere with a managed
				network.
				AUTO IP: A link-local IP address 169.254.x.x
				is set.
				LEGACY: The address 192.0.0.192 is set,
				consistent with older HP Jetdirect products.
		DHCP RELEASE	NO*	This menu appears if CONFIG METHOD is
			YES	set to DHCP and a DHCP lease for the print
				server exists.
				NO: The current DHCP lease is saved.
				YES: The current DHCP lease and the leased
				IP address are released.

ENWW Tools for troubleshooting 335