HP CP4525DN Laser CC494A#ABA manual Post-service test, Print-quality test

Post-service test

Perform the following test to verify that the repair or replacement was successful.

Print-quality test

1.Verify that you have completed the necessary reassembly steps.

2.Make sure that the tray contains clean, unmarked paper.

3.Attach the power cord and interface cable or interface cables, and then turn on the product.

4.Verify that the expected startup sounds occur.

5.Print a configuration page, and then verify that the expected printing sounds occur.

6.Print a demo page, and then verify that the print quality is as expected.

7.Send a print job from the host computer, and then verify that the output meets expectations.

8.If necessary, restore any customer-specified settings.

9.Clean the outside of the product with a damp cloth.

ENWW Post-service test 71