HP CP4525DN Laser CC494A#ABA Print Results YES, Ping Results, Packets Sent, Received, Rtt Min

Table 3-13Embedded Jetdirect menu (continued)

Item	Sub-item	Sub-item	Sub-item	Description
		PRINT RESULTS	YES	If the ping test was not set for continuous
			NO*	operation, you can choose to print the test
				results. Select YES to print results. If you
				select NO, results are not printed.
		EXECUTE	YES	Specify whether to initiate the ping test.
			NO*	Select YES to initiate the test, or NO to not
				run the test.
	PING RESULTS			Use this item to view the ping test status and
				results using the control panel display. You
				can select the following items:
		PACKETS SENT		Shows the number of packets (0 - 65535)
				sent to the remote host since the most recent
				test was initiated or completed. The default is
				0.
		PACKETS		Shows the number of packets (0 - 65535)
		RECEIVED		received from the remote host since the most
				recent test was initiated or completed. The
				default is 0.
		PERCENT LOST		Shows the percent (0 to 100) of ping test
				packets that were sent with no response from
				the remote host since the most recent test
				was initiated or completed. The default is 0.
		RTT MIN		Shows the minimum detected roundtrip-time
				(RTT), from 0 to 4096 milliseconds, for packet
				transmission and response. The default is 0.
		RTT MAX		Shows the maximum detected roundtrip-time
				(RTT), from 0 to 4096 milliseconds, for packet
				transmission and response. The default is 0.
		RTT AVERAGE		Shows the average round-trip-time (RTT),
				from 0 to 4096 milliseconds, for packet
				transmission and response. The default is 0.
		PING IN	YES	Shows whether a ping test is in progress.
		PROGRESS	NO*	YES indicates a test in progress, and NO
				indicates that a test completed or was not run.

340 Chapter 3 Solve problems ENWW