Panasonic SC-AKX50 Advanced recording functions, High-speed recording, Recording mode

Advanced recording functions

High-speed recording

Recording speed:

CD : Four times (maximum of 4x) the normal speed.

CD-RW : Two times (2x) the normal speed.

1 Insert the disc you want to record.

2 Press [4/9, CD] and then [8] (stop).

To record a specific track, press [PLAY MODE] to select 1-TRACK.

3 Press [CD HI-SPEED] and

[7/9, USB REC] or [7/9, MEMORY REC] simultaneously to start recording.

Note:

•Depending on the condition of the disc, it may not be possible to record at four times the normal speed or perform high-speed recording. Record the CD at normal speed.

•The sound is muted during high-speed recording.

Recording from CD using analogue

format

You can change your recording mode from the default digital recording to analogue recording.

1 Press [4/9, CD] and then [8] (stop).

2 Press and hold [EDIT MODE] to select “ANALOG-REC”.

Each time you press and hold the button:

ANALOG-REC DIGITAL-REC (analogue recording) { (digital recording)

Note:

•The recording mode returns to the default “DIGITAL- REC” after completing the analogue recording.

•High-speed recording is not applicable while using analogue mode.

Recording mode

You can select the desired recording mode before you start the basic recording (Z page 16).

Press [REC MODE] repeatedly to select your			ESPAÑOL
desired setting.
128 KBPS 192 KBPS		320 KBPS
128 KBPS	Long play mode
192 KBPS	Normal mode
320 KBPS	High quality sound mode
During recording			ESPAÑOL
Press [DISPLAY] repeatedly to display the
current recording mode.
Note:
You cannot change the recording mode during
recording.
Adding track marks
When recording from analogue source such as
radio, music port or AUX, you may want to separate
the sound or music track at desired point during			ESPAÑOL
Before recording
recording.

You can perform this separation by adding track marks using the various listed modes.

Press [EDIT MODE] repeatedly to select your desired track mark mode.

Radio:

MANUAL TIME MARK

MUSIC PORT or AUX:

MANUAL ] SYNCHRO ] TIME MARK		ESPAÑOL
MANUAL	Track marks are inserted manually.
	Press [OK] to add track mark
	during recording.
TIME	Track marks are inserted
MARK	automatically every fi ve minutes.
SYNCHRO	Recording starts automatically when
	the other equipment starts to play.
• If you press	Recording pause when it detects	ESPAÑOL
	[OK] or pause recording while using
	silence for approximately three
	seconds.
Note:
TIME MARK mode during recording, the fi ve-minute
counter will be reset.
• You cannot insert track marks manually in		RQTX1097
SYNCHRO mode.

19