ESPAÑOL
ESPAÑOL
ESPAÑOL
ESPAÑOL
ESPAÑOL
RQTX1097
22
7 Press [R/T] to select the desired recording storage location.
8 Press [OK] to confirm.
To activate the timer
9 Press [#PLAY/REC] repeatedly to turn on your desired timer.
#PLAY 
#REC
No display (off) 
10 Press [`] to turn off the unit.
The unit must be turned off for the timer to operate.
Change the | Repeat steps 1 to 8 and 10 |
settings | (Z page 21 and above). |
|
|
Change the | 1) Press [#PLAY/REC] to clear the |
volume | timer indicator from the display. |
| 2) Make changes to the volume. |
| 3) Perform steps 9 and 10. |
|
|
Check the | Press [CLOCK/TIMER] repeatedly to |
settings | select #PLAY or #REC. |
|
|
Cancel | Press [#PLAY/REC] to clear the |
| timer indicator from the display. |
|
|
Note:
•The play timer will start at the preset time with volume increasing gradually to preset level.
•The record timer will start 30 seconds before the set time with the volume muted.
•The timer comes on at the set time every day if the timer is on.
•The unit must be in the standby mode for the timer to function.
•If you turn the unit off and on again while a timer is functioning, the fi nish time setting will not be activated.
Using sound effects
Changing the sound quality:
Preset EQ
Press [PRESET EQ] repeatedly to select your desired setting.
HEAVY | Adds punch to rock |
|
|
CLEAR | Clarifi es higher frequencies |
|
|
SOFT | For background music |
|
|
VOCAL | Adds gloss to vocal |
|
|
FLAT | No effect |
|
|
Changing the sound quality:
Manual EQ
1 Press [MANUAL EQ] repeatedly to select your desired setting.
BASS | For lower pitch sound |
|
|
MID | For middle pitch sound |
|
|
TREBLE | For higher pitch sound |
|
|
2 Press [2/3] or [5/6] to adjust the level.
Note:
•The level of the pitch is between
•The changes you make are stored and automatically recalled the next time you select “MANUAL EQ”.
Enhancing the stereo sound:
SURROUND sound
Enables you to add natural width and depth to the stereo sound.
To activate
Press and hold [− SURROUND] to display
“
” indicator.
To cancel
Press and hold [− SURROUND] again to clear
“
” indicator.
Note:
•Surround sound is less discernible when listening through headphones.
•If interference in FM stereo reception increases, cancel the surround sound effect.
RQT804
