Panasonic SC-AKX50 operating instructions Using other optional Equipments

	Using other optional
	equipments
	Note:
ESPAÑOL	All the peripheral components and cables are sold
	Avoid interfering with other
	separately.
	Panasonic equipment
	Other Panasonic audio or video equipment may
	start functioning when you operate the unit using the
	supplied remote control.
	You can operate this unit in another mode by setting
	the remote control operating mode to “REMOTE 2”.
ESPAÑOL	The main unit and remote control must be set to
	the same mode.
	1 Press and hold [MUSIC P./AUX] on the
	main unit and [2] on the remote control
	until the main unit’s display shows
	“REMOTE 2”.
	2 Press and hold [OK] and [2] on the
	remote control for at least 2 seconds.
ESPAÑOL	To change the mode back to “REMOTE 1”, repeat
	steps 1 and 2 by replacing [2] with [1].
	Connecting and playing a portable
	audio equipment
	This feature enables you to enjoy music from a
	portable audio equipment.
	Audio cord
	(not included)	x OPEN/CLOSE	MIC VOL
ESPAÑOL
	MUSIC PORT	MIN MIC MAX
	Portable audio equipment

(not included)

Switch off the equalizer function (if there is any) of the portable audio equipment before you plug into the MUSIC PORT jack. Otherwise, sound from the speaker may be distorted.

ESPAÑOL		2	Press [MUSIC P./AUX] repeatedly to
		1	Plug the audio cord into the MUSIC
			PORT jack.
			select “MUSIC PORT”.
	RQTX1097	3	Play the portable audio equipment.
			(See the portable audio equipment’s

instruction manual.)

24

Connecting and playing other

external unit

You can connect to an analogue player with a built-in phone equalizer.

“LINE OUT”	Rear panel of
position	this main unit

(R)

Analogue player (L) (not included)

1 Press [MUSIC P./AUX] repeatedly to select “AUX”.

2 Play the external unit. (See the external unit’s instruction manual.)

Note:

•When units other than those described above are to be connected, please consult your audio dealer.

•Sound distortion may occur when you use an adaptor other than the one supplied.

RQT804