Sharp AR-507 8-17, KEY OPERATOR PROGRAMS Add or Change Extra Preset Ratios, Press the “OK” key

KEY OPERATOR PROGRAMS

Add or Change Extra Preset Ratios

Two extra preset copy ratios can be added within both the reduction range (25% to 99%) and the enlargement range (101% to 400% ). Only added preset copy ratios can be changed. The standard preset copy ratios are fixed in memory and cannot be changed.

When the “ADD OR CHANGE EXTRA PRESET RATIOS.” key is pressed, the following display will appear.

KEY OPERATOR PROGRAMS
ADD OR	CHANGE EXTRA	OK
PRESET	RATIOS.

SELECT THE RATIO TO BE ADDED OR CHANGED AND

SET NEW PRESET RATIO.

REDUCTION ENLARGEMENT

60

(25~99)(101~400)

1.Press a key under “REDUCTION” or “ENLARGEMENT” on the touch panel.

●The selected key will be highlighted.

2.Use the and keys to set the desired copy ratio.

●To decrease or increase the copy ratio rapidly, press and hold

the or key.

●To add or change other extra preset copy ratios, repeat steps 1 and 2.

●To cancel an extra preset ratio, select the copy ratio and press the CLEAR ( C ) key.

3.Press the “OK” key.

Setting a Maximum Number of Copies

Use this program to limit the maximum number of copies per copy run which can be input in the copy quantity display.

When the “SETTING A MAXIMUM NUMBER OF COPIES.” key is pressed, the following display will appear.

KEY OPERATOR PROGRAMS
SETTING A MAXIMUM	OK
NUMBER OF COPIES.
INPUT THE NUMBER AND PRESS [OK].
MAXIMUM NUMBER OF COPIES
999	(1~999)

1.Input the number using the 10-key pad.

● A number from 1 to 999 can be set.

2.Press the “OK” key.

KEY OPERATOR’S GUIDE8

Key operator programs CHAPTER

8-17