KEY OPERATOR PROGRAMS

Preheat Mode Setting

Preheat mode functions to control the power consumption by lowering the temperature of the fusing unit to a programmed level once a programmed length of time has elapsed without any copier operation after the last copy of a run is made or power is turned on. This function lowers user’s electricity bill, reduces waste of natural resources, and cuts down on environmental pollution. The programmed time is set to 15 minutes for this function on completion of shipment from the factory. The default time can be changed optionally within the prescribed range of time. We suggest you set the most appropriate time according to your usage pattern.

This program is used to set the time that elapses before the copier enters the preheat mode after copying is completed. The interval can be set between 1 and 240 minutes in 1 minute increments.

When the “PREHEAT MODE SETTING.” key is pressed, the following display will appear.

KEY OPERATOR PROGRAMS

 

 

 

PREHEAT MODE SETTING.

 

OK

 

SET THE TIME FOR PREHEAT MODE.

 

TIME: 15

(1~240)

 

 

min.

 

 

 

 

 

 

 

 

 

 

 

 

1.Set the desired time interval using the and keys.

2.Press the “OK” key.

Noise Level Reduce Mode

When the copier is programmed to enter the noise level reduce mode, the noise level will be reduced in the standby mode, however, the first copy time will be several seconds longer when the copier is in this mode. This program is used to set the time that elapses before the copier enters the noise level reduce mode after copying is completed. When the “NOISE LEVEL REDUCE MODE.” key is pressed, the following display will appear.

KEY OPERATOR’S GUIDE8

Key operator programs CHAPTER

KEY OPERATOR PROGRAMS

NOISE LEVEL REDUCE MODE

OK

SET THE TIME FOR NOISE LEVEL REDUCE MODE.

TIME

(10~240)

sec.

 

CANCEL TIMER

1.Set the time using the and keys.

To enable the time setting, press the check box of the “CANCEL TIMER” to clear the check mark in the check box.

2.Press the “OK” key.

8-24

Page 164
Image 164
Sharp AR-507 operation manual Preheat Mode Setting, Noise Level Reduce Mode, Set the time using the and keys