Sharp AR-507 operation manual 8-27, KEY OPERATOR PROGRAMS Disabling Deletion of Job Programs

KEY OPERATOR PROGRAMS

Disabling Deletion of Job Programs

This program is used to prevent stored programs from being replaced or deleted. If this program is set, storing of job programs is also disabled.

To prevent job programs stored in memory from being replaced or deleted, press the check box of “DISABLING DELETION OF JOB PROGRAMS.” to display a check mark in the check box.

To allow replacement/deletion, press the check box of this program again to clear the check mark in the check box.

Disabling of Document Feeder

This program is used to prevent the use of the document feeder when it malfunctions.

To prohibit use of the document feeder, press the check box of “DISABLING OF DOCUMENT FEEDER.” to display a check mark in the check box.

To enable use of the document feeder, press the check box of this program again to clear the check mark in the check box.

Disabling of Duplex Copying

This program is used to enable or disable the duplex system. If a malfunction occurs within the duplex system of the copier, the system can be disabled until it is serviced. The rest of the copier in the meantime will remain operable.

To disable the duplex system, press the check box of “DISABLING OF DUPLEX COPYING.” to display a check mark in the check box.

To enable the duplex system, press the check box of this program again to clear the check mark in the check box.

KEY OPERATOR’S GUIDE8

Key operator programs CHAPTER

8-27