Sharp AR-507 operation manual Margin Shift, Special Modes screen will appear

MARGIN SHIFT

CHAPTER3 SPECIAL FUNCTIONS Margin shift

OriginalCopy

Expanded margin

(Initial setting:

copy image shifted to the right)

Margin is expanded here.

Margin is expanded here.

The MARGIN SHIFT feature, in its initial setting, automatically shifts the text or image to the right both on one-sided copies and on the front side of two- sided copies. The text or image is shifted to the left on the reverse side of two-sided copies. Shift direction can be changed to left,right, up or down as described in step 4 below.

●The standard shift amount is 10mm (1/2"), but can be changed from 0mm to 20 mm in 1mm increments (from 0" to 1" in 1/8" increments).

●When copying originals from the RSPF onto extra size copy paper , the expanded margin might not be properly made.

★ KEY OPERATOR The initial shift setting can be changed from 0mm to 20 mm in 1mm increments (from 0" to 1" in 1/8" increments). See page 8- 18.

NOTE:

The front side and reverse side are referred to as “SIDE 1” and “SIDE 2” respectively on the touch panel.

Place the original in the document feeder tray or on the

1 document glass.

2	Press the SPECIAL MODES key.
	● The SPECIAL MODES screen will appear.
READY TO CO	READY TO COPY.
	SPECIAL MODES		OK
	MARGIN SHIFT	ERASE	DUAL PAGE
			COPY
	MULTI SHOT	COVERS	TRANSPARENCY
			INSERTS
	PAMPHLET COPY	IMAGE EDIT	TEXT STAMP
	AUTO	AUTO A4	100%
	EXPOSURE	PAPER SELECT	COPY RATIO

3-4