Sharp AR-507 8-28, KEY OPERATOR PROGRAMS Disabling of Stapler, Disabling of Covers Mode

KEY OPERATOR PROGRAMS

Disabling of Stapler

This program is used to enable or disable the stapler of the optional finisher (AR-FN3). If the stapler malfunctions, it can be disabled to prevent further malfunction or possible damage to the stapler until it is serviced.

To disable the stapler, press the check box of “DISABLING OF STAPLER.” to display a check mark in the check box. To enable the stapler, press the check box of this program again to clear the check mark in the check box.

Disabling of Covers Mode

This program is used to prevent selection of the COVERS mode.

To disable the COVERS mode, press the check box of “DISABLING OF COVERS MODE.” to display a check mark in the check box.

To enable use of the mode, press the check box of this program again to clear the check mark in the check box.

KEY OPERATOR’S GUIDE

Key operator programs

Prohibit Auto Paper Selection from the Bypass-Tray

This program is used to prevent automatic paper selection from the bypass tray. In the default setting, auto paper selection from the bypass tray is disabled.

To disable auto paper selection from the bypass tray, press the check box of “PROHIBIT AUTO PAPER SELECTION FROM THE BYPASS-TRAY.” to display a check mark in the check box.

To restore this function, press the check box of this program again to clear the check mark in the check box.

NOTE:

Auto paper selection from the bypass tray is available only when Heavy Paper on the Bypass Tray program (see page 8-22) is not set and Prohibit Auto Paper Selection from the Bypass-Tray program is not set, either.

Disabling of PC/Modem Access

This program is used to determine whether persons other than persons who know the key operator code number will be permitted access via a computer or other equipment, either directly or through a telephone line, to the copier’s key operator programs.

CHAPTER8

8-28