Sharp AR-507 operation manual Initial Margin Shift Setting, Erase Width Adjustment

KEY OPERATOR PROGRAMS

Initial Margin Shift Setting

Set the initial margin shift value with this program.

When the “INITIAL MARGIN SHIFT SETTING.” key is pressed, the following display will appear.

KEY OPERATOR PROGRAMS
INITIAL MARGIN SHIFT		CANCEL	OK
SETTING.
SET THE INITIAL MARGIN SHIFT.
SIDE 1		SIDE 2
10	(0~20)	10	(0~20)
	mm		mm

1.Adjust the value for each side using the and keys.

●The value can be set from 0mm to 20mm in 1mm increments (0" to 1" in 1/8" increments).

2.Press the “OK” key.

Erase Width Adjustment

Set the initial setting of the amount of the erase area with this program. When the “ERASE WIDTH ADJUSTMENT.” key is pressed, the following display will appear.

KEY OPERATOR PROGRAMS

ERASE WIDTH

ADJUSTMENT.OK

SET THE INITIAL ERASE WIDTH.

EDGE ERASE CENTRE ERASE

10	(0~20)	10	(0~20)
	mm		mm

KEY OPERATOR’S GUIDE

Key operator programs

1.Adjust the values for the edge erase mode and centre

erase mode using the and keys.

●The values can be set from 0mm to 20mm in 1mm increments (0" to 1" in 1/8" increments).

2.Press the “OK” key.

CHAPTER8

8-18