Sharp AR-507 8-20, KEY OPERATOR PROGRAMS Staple Position Setting, Date Format Setting, March

KEY OPERATOR PROGRAMS

Staple Position Setting

This program is used to select the initial stapling position for an optional finisher (AR-FN3).

When the “STAPLE POSITION SETTING.” key is pressed, the following display will appear.

KEY OPERATOR PROGRAMS

STAPLE POSITION

SETTING.OK

1.Select the desired stapling position on the touch panel.

2.Press the “OK” key.

Date Format Setting

This program is used to set the initial date format for the date function. When the “DATE FORMAT SETTING.” key is pressed, the following display will appear.

KEY OPERATOR PROGRAMS

DATE FORMAT SETTING. OK

23 March, 2000

March 23, 2000

23/03/00

03/23/00

KEY OPERATOR’S GUIDE

Key operator programs

1.Select the desired date format on the touch panel.

●The date formats displayed on the touch panel may be different from the illustration above depending on the country or region.

2.Press the “OK” key.

CHAPTER8

8-20