Large capacity tray AR-LC1N Chapter | Sharp AR-507 guide

7-20

● The paper tray control button lamp will blink as the feed table returns to the feed position and will light up steadily when it is in position to feed.

5

● Be sure to load paper appropriate for the large capacity tray. See page 7-19.

● Do not exceed the maximum height line.

Gently push the large capacity tray back into place.

Maximum height line

4

Load the paper onto the feed table.

● Do not pull the paper tray out before the button lamp goes out.

2

Only use paper within the Sharp specification and follow

3 the paper manufacturer’s instructions regarding fanning and loading the paper.

When the button lamp goes out, pull the paper tray out.

● The button lamp will blink while the feed table is lowering and will go out when the tray is ready to be opened.

1

Press the paper tray control button on the large capacity tray.

LARGE CAPACITY TRAY (AR-LC1N)

Loading copy paper

The large capacity tray will automatically lower when the tray runs out of paper.

OPTIONAL EQUIPMENT7

Large capacity tray (AR-LC1N) CHAPTER

Image 134

Sharp AR-507 operation manual Large capacity tray AR-LC1N Chapter

Contents

AR-507 CINSE1982FC51 Contents For General Users Using this ManualIntroduction For Key Operators Chapter Installation Requirements Getting Started Cautions Class Laser Product Laser Klasse Power on and OFF Auto power shut-off mode Power on and OFFPower save modes Preheat mode Press the Information key in the standby mode Information Function Selection of function Using the Touch PanelHow to use the touch panel Particular settings for these functions Function setting iconsUsing the Touch Panel Can be easily called by pressing its icon Face UP/FACE Down Delivery Making Copies Special Papers manual feed Auditing Accounts Enter Your Account Number Different copy image ranges Using the RspfStream feeding mode Use the 10-key pad to enter the desired number Copies Using the RspfSided copies of 1-sided originals Press the Start key Press the key on the touch panel Sided copies from 1-sided originalsPress the 2-SIDED Copy key Sided copies from 2-sided originals To cancel a copy run, press the Clear ALL CA key. Copying Close the document feeder cover Making Copies Copying from Copying from the Document Glass Replace the first original with the next original after Key indicator lights up, Remove the first original and replace it with the next REDUCTION/ENLARGEMENT/ZOOM Automatic selection REDUCTION/ENLARGEMENT/ZOOM Manual selection 141 % Special Papers manual feed Insert the copy paper all the way into the bypass tray Special Papers manual feed Two-sided copying with bypass tray Text, text/photo, and photo Exposure AdjustmentsAutomatic SORT/GROUP Sort modeGroup mode All copies of the same original will be grouped in the exit Press the Program P key JOB MemoryStoring a job program Press the STORE/DELETE key on the touch panel Recalling a job program JOB MemoryDeleting a stored job program Interrupting a Copy RUN Press the Interrupt key Special Functions XY Zoom Press the XY Zoom key Use the reduction, enlargement, and Zoom XY ZoomPress the Y key Keys to change the copy ratio in the vertical Y direction Margin Shift Special Modes screen will appear Press the Margin Shift key on the touch panel Select the desired shift amounts using the and 5 keysMargin Shift Select the shift direction Erase Press the Erase key on the touch panel Erase Select the desired erase modeAdjust the amount of edge erase and/or centre erase if Needed Press the Dual page Copy key on the touch panel Dual page CopyingPlace the originals on the document glass with Enter the desired number of copies Dual page CopyingEnsure that the desired tray is selected Multi Shot Multi Shot Press the upper OK key Press the 2-SIDED Copy key and select the desired CoversPlace the originals in the document feeder tray Duplex selection window Press the upper OK key Select cover placementCovers Enter the desired number of copies and press the Start key Transparency Film with Insert Sheets Press the Transparency Inserts key on the touch panel Transparency Film with Insert Sheets Ensure that the desired tray is selected for insert sheets Pamphlet Copy Place the originals in the document feeder tray or on Select the type of originals Pamphlet CopyPress the Pamphlet Copy key on the touch panel Select the binding position AUT Check the copy paper selection Image Editing Functions JOB Build Press the Image Edit key Make all other desired copy mode selections and enterImage Editing Functions Press the JOB Build key Centring After the first section of original pages has been fed Press the Paper Select key on the touch panel Press the Image Edit key on the touch panelPress the Centring key Replace the finished original with the next original after On the touch panel Select the desired copy paper size Press the Repeat Copy key on the touch panel Cancel OK Border Line Press the B/W Reverse key on the touch panel Special Modes screen will appearImage Edit menu will appear Centring E F Press the Binding Change key on the touch panel Press the Image Edit key on the touch panel Make all other desired copier selections and enter Text Stamp Date Text Stamp Select the print direction Press the Select Stamp key on the touch panel Select the desired stamp to be printed Adjust the darkness of the background of the stampSelect the stamp position Cancel OK Position Draft Press the Watermark key on the touch panel To adjust the exposure, press the Option keyAdjust the darkness of the watermark Select the desired watermark to be printed Cancel OK 11Press the upper OK key Number Select the starting page number Press the page Number key on the touch panelSelect the desired page number format OK 9 Press the upper OK key Replace the finished original with the next original after Tandem Copy Press the Tandem Copy key on the touch panel On the main copier, press the Start key Copier is installed in the sub copierTandem Copy Example Setting ReviewPress the Review key To exit the review screen, press the Exit key Supplies Loading copy paper PaperTypes and sizes of copy paper Push the paper tray firmly back into the copier PaperLoading paper in paper trays 1 Changing the copy paper size in the tray Load copy paper into the tray New toner cartridge vertically and vigorously shake it Adding TonerOpen the front cover Up and down about 20 times, then invert the cartridge Adding Toner Add only one cartridge of toner Place Close the toner collecting container cover Used Toner DisposalDisengage and remove the container from the copier Open the toner collecting container cover Proper storage Storage of SuppliesPhotoconductive drum Store the supplies in a location that is Copier TROUBLE? Misfeed Removal Misfeed in the Rspf Remove the misfed original. Close the paper guide after Misfeed RemovalOpen the feeding roller cover Removing the misfed original Transport cover COPIERTROUBLE? Misfeed removal Open the right side cover Misfeed in the bypass trayMisfeed in paper trays 1 Hold the handle and gently open the cover Misfeed in the transport area Remove the misfed paper Transport lever Roller rotating knob a Paper guide Misfeed around the fusing unit and exit area Open the exit area cover carefully Remove the misfed paper Close the exit area cover Close the front cover Misfeed in the reversing area Open the left side cover Gently remove the misfed paper Open the exit area cover carefully Misfeed in the duplex moduleClose the exit area cover and the left side cover Close the exit area cover Maintenance Required Troubleshooting Troubleshooting Self-diagnostic functionPage General Information Part Names and Functions Exterior Part Names and Functions Interior Operation Panel Touch Panel Basic screen Rspf scanning section User MaintenanceDocument glass and document feeder cover Touch Panel Contrast Adjustment Press the Custom Settings key Specifications Copier Specifications Document FeederPage Optional Equipment System Configuration Part Names SpecificationsFinisher AR-FN3 Finisher AR-FN3 Offset modeNON-OFFSET mode Offset stack Staple Sort mode Sort and group Set the originals in the document feeder tray Using the RspfStaple sort Press the Output key Staple Sort Sort Group Select the desired stapling position Using the document glass To be stapled to the upper right Key on the touch panel Press the OK key Staple cartridge replacement Remove the rear paper and tape from the cartridge 11Push the finisher toward the copier and latch it in place Staple jam removal 10Push the finisher toward the copier and latch it in place Return the lever to its original positionInsert the staple box into the stapler unit until it clicks Misfeed removal Misfeed in the upper transport area Close the top cover Cover of the paper feed area and open the top cover Misfeed in the lower transport area Push the finisher toward the copier and latch it in place Removing the paper Close the paper transport area cover Specifications Large Capacity Tray AR-LC1N Large capacity tray AR-LC1N Chapter Large Capacity Tray AR-LC1N Remove the misfed paper Gently push the tray back into place STAND/500-SHEET Paper Drawer AR-DE7 STAND/500-SHEET Paper Drawer AR-DE7 Open the lower right side cover and remove any misfed paper Page KEY OPERATOR’S Guide Registering the key operator code number Enter your key operator code number using the 10-key PadKEY Operator Code Number KEY Operator Code Number Press the KEY Operator Code Number Change Key KEY Operator Programs KEY Operator Programs Extra KEY Operator Programs Press the Copier key on the touch panel Using the key operator programsEnter the key operator code number Dashes in the display will change to asterisks Follow instructions for the program Select the desired category on the touch panelPress the key of the desired program on the touch panel Press the key to advance through the accounts Auditing ModeNumber of Copies per Account Billing by Account Press the OK key to exit the program To reset a single account Resetting AccountTo reset all accounts Press the key of an account to be reset To delete accounts Account Number ControlTo register accounts Press the Enter key To print all registered account numbers Price/Copy SettingTo change an account number Press the Print key Enter the price code #1 #3 and then press the Enter key Account Limit SettingTo set a limit Continue with steps 3 and 4 for other individual accounts To set a limit for all accounts Account Number Security Key Operator Code Number Change Exposure AdjustmentAdjust the exposure using the and keys Press the OK key Input the number using the 10-key pad Add or Change Extra Preset RatiosSetting a Maximum Number of Copies Use the and keys to set the desired copy ratio Adjust the value for each side using the and keys Initial Margin Shift SettingErase Width Adjustment To return to the factory default settings Initial Status SettingTo establish new initial settings Stream Feeding Mode Staple Position Setting Date Format Setting Date and Time Adjustment Rotation Copy Setting Size Setting for Extra Heavy Paper on the Bypass Tray Enter the time interval using the and keys Press the OK key Auto Power Shut-off TimerAuto Clear Setting Set the desired time interval using the and keys Set the time using the and keys Preheat Mode SettingNoise Level Reduce Mode Message Time Setting Set the time using the and keys Press the OK key Disabling of Bypass-Tray in Duplex Copy Disabling of Auto Tray SwitchingDisabling of Auto Paper Selection Disabling of Duplex Copying Disabling Deletion of Job ProgramsDisabling of Document Feeder Disabling of Stapler Disabling of Covers ModeDisabling of PC/Modem Access Prohibit Auto Paper Selection from the Bypass-Tray Disabling of Auto Power Shut-off Mode Disabling of Beep When Keys Touched Press the Program List PRINTOUT. key Total CountProgram List Printout Finisher is OUT of SERVICE. Press CA to Cancel JOB KEY Operator Assistance Call Memo KEY Operator Code Number Factory Setting Factory setting = 2000C DSC1 CINSE1982FC51 Mains Plug Wiring Instructions Sharp Corporation