Sharp AR-507 8-13, Key Operator Programs, To change an account number, Price/Copy Setting

KEY OPERATOR PROGRAMS

To change an account number

1.Press the “CHANGE” key.

2.Enter the account number to be changed using the 10-key pad.

3.Enter a new account number.

4.Press the “ENTER” key.

●If a number that is already registered is entered, the message “THIS NUMBER IS ALREADY USED.” will appear. Press the “OK” key and enter another number.

5.To change other account numbers, repeat steps 2 to 4. Press the “OK” key twice to exit the program.

To print all registered account numbers

1.Press the “PRINT” key.

●The copier will start printing. To stop printing after starting, press the “CANCEL” key.

2.Press the “OK” key to exit the program.

Price/Copy Setting

This program is used to set the price per copy. Three price per copy values can be set (#1, #2, and #3). As copies are made, the cumulative cost of the copies is kept in memory.

When the “PRICE/COPY SETTING.” key is pressed, the following display will appear.

KEY OPERATOR PROGRAMS
PRICE/COPY SETTING	OK

INPUT NEW UNIT PRICE AND PRESS [ENTER].

USE INTERRUPT KEY FOR DECIMAL POINT.

PRICE CODE		PRESENT PRICE	NEW PRICE
# 1		80	-
#	2	60	-
#	3	180	-

ENTER

1/2

1.Enter the new price for price code #1 by using the 10-key pad and then press the “ENTER” key.

●Use the INTERRUPT () key for decimal points.

●If the “ENTER” key is pressed without entering a value, the price per copy will not be changed.

2.Similarly enter the prices for price codes #2 and #3.

●The following display will appear.

KEY OPERATOR’S GUIDE8

Key operator programs CHAPTER

8-13