Sharp AR-507 operation manual Enable/Disable Settings, 8-26, Key Operator Programs

KEY OPERATOR PROGRAMS

ENABLE/DISABLE SETTINGS

The programs of this category are used to enable or disable some functions. These programs can be set or cancelled by pressing the check box of each program.

Disabling of Auto Paper Selection

This program is used to prevent automatic paper selection. When disabled, the copier will not automatically select a paper tray containing paper that matches the size of the original placed on the document glass or in the document feeder.

To disable auto paper selection, press the check box of “DISABLING OF AUTO PAPER SELECTION.” to display a check mark in the check box.

To restore this function, press the check box of this program again to clear the check mark in the check box.

Disabling of Auto Tray Switching

This program prevents automatic switching between the paper trays.

To disable auto tray switching, press the check box of “DISABLING OF AUTO TRAY SWITCHING.” to display a check mark in the check box.

To restore this function, press the check box of this program again to clear the check mark in the check box.

Disabling of Bypass-Tray in Duplex Copy

This program is used to disable the use of the bypass tray when making duplex copies.

KEY OPERATOR’S GUIDE8

Key operator programs CHAPTER

To disable use of the bypass tray when making duplex copies, press the check box of “DISABLING OF BYPASS- TRAY IN DUPLEX COPY.” to display a check mark in the check box.

To restore use of the bypass tray, press the check box of this program again to clear the check mark in the check box.

8-26