Sharp AR-507 operation manual Centring, After the first section of original pages has been fed

IMAGE EDITING FUNCTIONS

	INTERRUPT	CLEAR ALL
		CA
			START
	CLEAR
	C
3CHAPTER	PLACE NEXT ORIGINAL. PRESS [START].
	WHEN FINISHED, PRESS [READ-END].
SPECIALFUNCTIONSImageediting			READ-END
	AUTO	AUTO A4	100%
	EXPOSURE	PAPER SELECT	COPY RATIO
functions	CENTRING

8	Press the START ( ) key.
	● Scanning of the first section will start.

After the first section of original pages has been fed and

9 the START lights up, remove the scanned originals from the exit area, set the next section of original pages into the document feeder tray and press the START () key. Repeat this sequence until all sections have been fed. Then press the “READ-END” key on the touch panel.

●Copying will start at this time.

When the original and copy paper are of different sizes, CENTRING is used to shift the image as a whole to the centre of the copy paper. The image will shift only in the left to right direction, not in the top to bottom direction.

●This function will not work when non-standard size originals or copy paper are used. This function cannot be selected when enlargement copying has been selected.

Place the originals in the document feeder tray or on the

1 document glass.

3-22