Sharp AR-507 operation manual Key Operator Programs

KEY OPERATOR PROGRAMS

Category	Program Name	Function	Page No.
	Date Format	Sets the initial date format.	8-20
	Setting
	Date and Time	Adjusts the date and time.	8-21
	Adjustment
	Rotation Copy	Enables/disables rotation of original images.	8-21
	Setting
	Size Setting for	Sets a paper size in each tray with [EXTRA] setting.	8-22
	[EXTRA]
	Heavy Paper on	Enables/disables selection of paper type placed in	8-22
	the Bypass Tray	the bypass tray.
Timer Settings	Auto Power	Sets a time interval after which the copier	8-23
	Shut-off Timer	automatically turns off.
	Auto Clear Setting	Sets a time interval after which the copier returns	8-23
		to the initial settings.
	Preheat Mode	Sets the time that elapses before the copier enters	8-24
	Setting	the preheat mode after copying is completed.
	Noise Level	Sets the time that elapses before the copier enters the 8-24
	Reduce Mode	noise level reduce mode after copying is completed.
	Message Time	Sets the length of time that messages are displayed.	8-25
	Setting
Enable/Disable	Disabling of Auto	Prevents automatic paper selection. To disable auto	8-26
Settings	Paper Selection	paper selection from the bypass tray, see page 8-28,
		Prohibit Auto Paper Selection from the Bypass-Tray.
	Disabling of Auto	Prevents automatic switching between the paper	8-26
	Tray Switching	trays.
	Disabling of	Prohibits the use of the bypass tray during	8-26
	Bypass-Tray	duplex copying.
	in Duplex Copy
	Disabling	Prevents stored programs from being replaced or	8-27
	Deletion of Job	deleted.
	Programs
	Disabling of	Prevents the use of the document feeder when it	8-27
	Document Feeder	malfunctions.
	Disabling of Duplex	Temporarily prevents the duplex system from	8-27
	Copying	operating when it malfunctions. Allows the use of the
		copier but not the duplex system.

KEY OPERATOR’S GUIDE8

Key operator programs CHAPTER

8-5