Sharp AR-507 Key Operator Code Number Factory Setting, 8-33, Factory setting =, Chapter

KEY OPERATOR CODE NUMBER: FACTORY SETTING

✂

The following is the factory setting of the Key Operator Code

Number, which must be used to access the Key Operator

Program.

Factory setting = 00000

This number must be entered when accessing the Key

Operator Program for the first time. (See page 8-2.)

NOTE:

The Key Operator Code Number is an important security number allowing the Key Operator to configure the copier’s functions and auditor’s settings.

You should register your own code number — different from the factory setting above — immediately after your copier is installed.

★KEY OPERATOR

Detach this page and store it in a safe place.

Key operator code number: factory	KEY OPERATOR’S
setting	GUIDE
CHAPTER8

8-33