Sharp AR-507 operation manual Special Papers manual feed, Two-sided copying with bypass tray

SPECIAL PAPERS (manual feed)

COPY.

1. A4 A4R

2. A3

O	1	11	100%
	AUTO 8/2
URE	PAPER SELECT		COPY RATIO

Press the “PAPER SELECT” key on the touch panel and

5 then select the bypass tray.

●If paper type selection has been enabled, select “60 ~ 105 g/m2” (“16 ~ 28 lbs.”) or “106 ~ 200 g/m2” (“28+ ~ 55 lbs.”).

READY TO COPY.
1. A4	A4R
2. A3	PAPER TYPE
	60~105 g/m2
	106~200 g/m2

AUTO		100%
EXPOSURE	PAPER SELECT	COPY RATIO

CHAPTER2 MAKING

1	2	3	INT	CLEAR ALL
				CA
4	5	6
				START
7	8	9
AUDIT CLEAR		PROGRAM
	0	P

●If “60 ~ 105 g/m2” (“16 ~ 28 lbs.”) is specified and heavier paper is used, a misfeed may occur.

6 Set the number of copies.

7 Press the START () key.

COPIES Special papers (manual

Two-sided copying with bypass tray

Two-sided copies can be made manually using the bypass tray, when the heavy paper which is out of specification for duplex module is used.

feed)

2 1

2 1

4 3

1 2

Place the first original face down on the document glass

1 and make a copy.

●The first side of the copy can be made using any of the paper feed stations.

Replace the first original with the second original and

2 close the document cover.

●Make sure the first and second originals are oriented in the same way on the document glass.

●The first and second originals can be set in the document feeder tray. They must, however, be set and fed individually.

Turn the first copy over without changing its top-bottom

3 orientation and place it into the bypass tray. ● Be sure to feed the copies one sheet at a time.

Press the “PAPER SELECT” key and select the bypass

4 tray.

●If paper type selection has been enabled, select “60 ~ 105 g/m2” (“16 ~ 28 lbs.”) or “106 ~ 200 g/m2” (“28+ ~ 55 lbs.”).

5 Press the START () key.

2-15