Sharp AR-507 Copying From The Document Glass, sided copies from 1-sided originals, 100%

COPYING FROM THE DOCUMENT GLASS

1 2 3 INTERRUPT

4 5 6

7 8 9 CLEAR

AUDIT CLEAR	PROGRAM	C
0	P
INTERRUPT	CLEAR ALL

CA

START

CLEAR

C

3

PLACE NEXT ORIGINAL. PRESS [START]. WHEN FINISHED, PRESS [READ-END].

		READ-END
AUTO	AUTO A4	100%
EXPOSURE	PAPER SELECT	COPY RATIO

Use the 10-key pad to enter the desired number of

4 copies.

●The number will be shown in the copy quantity display of the touch panel.

●A single copy can be made with the initial setting, i.e., when “0” is displayed.

●Use the CLEAR ( C ) key to cancel an entry if a mistake is made.

●If you set a multiple number of copies, the copies will not be delivered collated in the default setting. To deliver in the SORT mode, press the OUTPUT key and then select the SORT mode on the touch panel. See page 2-17.

5	Press the START ( ) key.
	● If the copier is not in the SORT mode (the sort icon is not

displayed on the touch panel), copying will start and the number in the copy quantity display will decrease by 1 each time a copy is made. To repeat the same copy sequence with a different original, simply replace the original and press the START () key.

●If the copier is in the SORT mode, the original will be scanned

when the START () key is pressed but copying will not begin. Proceed to step 6.

●To cancel a copy run, press the CLEAR ALL ( CA ) key. Copying will stop and the number in the copy quantity display will be reset to 0.

Replace the first original with the next original after the

6 START () key indicator lights up, and then press the START () key. Repeat this step until all the originals have been scanned. Then, press the “READ-END” key on the touch panel.

●Copying will start after the “READ-END” key is pressed.

●Up to 120 sheets of A4 (8-1/2" x 11") originals or up to 60 sheets of originals larger than A4 (8-1/2" x 11") can be scanned.

CHAPTER2 MAKING COPIES Copying from the document glass

2-sided copies from 1-sided originals

Original size detector

Centring scale

Set the first page of the document onto the document

1 glass, using the centring scale to position it.

NOTE:

Do not place objects under the original size detector, because they may damage it.

Close the document feeder cover.

2 ● The original size will be indicated on the touch panel, and the paper traywiththecorrespondingpapersizewillbeautomaticallyselected.

2-9