Sharp AR-507 8-22, KEY OPERATOR PROGRAMS Size Setting for EXTRA, Heavy Paper on the Bypass Tray

KEY OPERATOR PROGRAMS

Size Setting for [EXTRA]

The paper sizes in the paper trays (except an optional large capacity tray) can be changed by the users. The copier senses the paper sizes with the paper size indicators in the paper trays. If a paper size indicator is set to [EXTRA] and this program is used, the copier can sense paper sizes as selected on the setting screen.

When the “SIZE SETTING FOR [EXTRA].” key is pressed, the following display will appear.

KEY OPERATOR PROGRAMS
	SIZE SETTING FOR		OK
	[EXTRA].
		PAPER TRAY
1	2	3	4

A3	B4	A4	A4R
B5	B5R	A5	EXTRA
AB		INCH

1.Select a paper tray on the touch panel.

2.Select a paper size for [EXTRA] setting.

To select a size of INCH series, press the “INCH” key and select a paper size.

●Select the paper size which matches the paper to be loaded into the paper tray.

●This setting can also be used for paper trays in an optional stand/ 500-sheet paper drawer (AR-DE7).

3.Press the “OK” key.

KEY OPERATOR’S GUIDE

Key operator programs

Heavy Paper on the Bypass Tray

In this copier, copies are normally delivered face down. Special paper including transparency film , however, cannot be delivered face down. If this program is set, any paper placed in the bypass tray will be regarded as special paper. Copies from the bypass tray will always be delivered face up. If this program is not set, paper type in the bypass tray can be specified. If plain paper is specified, copies will be delivered face down.

To regard paper placed in the bypass tray as special paper, press the check box of “HEAVY PAPER ON THE BYPASS TRAY.” to display a check mark in the check box.

To enable selection of paper type placed in the bypass tray, press the check box of this program again to clear the check mark in the check box.

CHAPTER8

8-22