Sharp AR-507 Reduction/Enlargement/Zoom, 2-11, Automatic selection, 100%, document glass

A total of four extra preset copy ratios, two each

REDUCTION/ENLARGEMENT/ZOOM

Reduction and enlargement ratios can be selected either automatically with the “AUTO IMAGE” key or manually with the reduction, enlargement or “ZOOM” keys on the touch panel. The zoom function enables precise copy ratio selection from 25% to 400% in 1% increments.

★ KEY OPERATOR

for reduction and enlargement, can be added. See page 8-17.

CHAPTER2

READY TO COPY.

1.A4

2.A3

AUTO	1	11	100%
	AUTO 8/2
EXPOSURE	PAPER SELECT		COPY RATIO

. A4

. A3

	AUTO IMAGE
A3	100%
PER SELECT	COPY RATIO

1	2	3	INT	CLEAR ALL
				CA
4	5	6
				START
7	8	9
AUDIT CLEAR		PROGRAM
	0	P

Automatic selection			MAKING
	Place the original in the document feeder tray or on the		COPIES
1 document glass.
	● The original size will be detected and indicated on the touch		Reduction/Enlargement/Zoom
2 select the paper tray with the desired paper size.
	panel.
	Press the “PAPER SELECT” key on the touch panel and
3	Press the “AUTO IMAGE” key on the touch panel.
	● The best reduction or enlargement ratio for the selected paper
	size will be automatically set and displayed on the touch panel.
	● If the originals and the selected copy paper are not facing the
	same direction, the image will be automatically rotated to match
	the copy paper. If enlargement copying onto a paper size larger
	than A4 (8-1/2" x 11") is performed and in case of 100% copying
	onto a paper size larger than B4 (8-1/2" x 14"), however, the
	image will not be rotated.
	NOTE:
	This feature will not work when original or copy paper is of non-
	standard size.
4 Enter the desired number of copies.
5	Press the START (	) key.
	● To cancel the automatic reduction/enlargement mode, press the

“AUTO IMAGE” key again.

2-11