Sharp AR-507 3-19, Pamphlet Copy, Check the copy paper selection, AUTO IMAGE AUTO A4 100%

PAMPHLET COPY

		7	Check the copy paper selection.
			● When the desired paper size is not selected, touch the desired
		AUT	paper tray on the touch panel then the AUTO IMAGE key. This
O	A4	7	lets the copier automatically set the best reduction or enlargement
			ratio and display it on the touch panel, judging from the placed
URE	PAPER SELECT	COP	original size and the desired paper size.
			(See steps 2 and 3 of page 2-11.)

1 2 3 INTERRUPT

4 5 6

7 8 9 CLEAR

AUDIT CLEAR	PROGRAM	C
0	P
INTERRUPT	CLEAR ALL

CA

START

CLEAR

C

8

9

Enter the desired number of copies.

Press the START () key.

●If the document feeder is used, copying will start after all originals are scanned.

●If the document glass is used, proceed to the next step.

CHAPTER3 SPECIAL FUNCTIONS Pamphlet copy

PLACE NEXT ORIGINAL. PRESS [START]. WHEN FINISHED, PRESS [READ-END].

READ-END

AUTO IMAGE

AUTO A4 100%

EXPOSURE PAPER SELECT COPY RATIO

Replace the finished original with the next original after

10the START () key indicator lights up, and then press the START () key. Repeat this step until all originals have been scanned. Then, press the “READ-END” key on the touch panel.

●Copying will start at this time.

●Up to 120 sheets of A4 (8-1/2" x 11") originals or up to 60 sheets of originals larger than A4 (8-1/2" x 11") can be scanned.

●If originals of different sizes are used, the copy paper size will be determined based on the original that is scanned first. If originals larger than the first original are used, a portion of the images may not be copied.

●You can make a pamphlet by folding the copies in two and stapling them.

●To cancel the PAMPHLET COPY function, select the PAMPHLET COPY function again and press the “CANCEL” key.

3-19