Sharp AR-507 FINISHER AR-FN3, Staple sort, Using the RSPF, Auto, Exposure, Press the OUTPUT key

FINISHER (AR-FN3)

Staple sort

The STAPLE SORT mode staples A4, A4R, B4, and A3 (8-1/2" x 11", 8-1/2" x 11"R, 8-1/2" x 14", and 11" x 17") size copies. Stapled sets cannot be delivered to the top tray.

●In the STAPLE SORT mode, copying will automatically stop when the number of copies output in the offset tray exceeds certain limits regardless of the tray capacity. In that case, follow the message on the screen. Such limits vary with the size of copy paper.

NOTE:

Different size originals cannot be copied onto copy paper of their respective sizes in the STAPLE SORT mode. The paper size selected for the first scanned original will be used for all originals. To copy different size originals in the STAPLE SORT mode, select the paper size for the largest original.

OPTIONAL EQUIPMENT7

Finisher (AR-FN3) CHAPTER

Using the RSPF

Set the originals in the document feeder tray.

Stapling position 1 ● If the number of copies in one set is more than 50 for

A4 or A4R (8-1/2" x 11" or 8-1/2" x 11"R) paper or 25 for B4 or A3 (8-1/2" x 14" or 11" x 17") paper, the copies will not be stapled.

● The stapling position shown in the left figure is the factory de- fault position.

2 Press the OUTPUT key.

AUTO

EXPOSURE

READY TO COPY.(DOCUMENT FEEDER MODE)			OK	3	Press the “STAPLE SORT” key on the touch panel.
OUTPUT
TOP TRAY
OFFSET	SORT	STAPLE	GROUP
		SORT
TRAY
OFFSET
AUTO	AUTO A4		100%
EXPOSURE	PAPER SELECT	COPY RATIO

7-6