Sharp AR-507 Other Programs, 8-30, Key Operator Programs, Total Count, Program List Printout

KEY OPERATOR PROGRAMS

OTHER PROGRAMS

The following two programs are not included in the four categories. The programs can be selected by pressing the relevant key on the touch panel after the key operator program mode is selected.

Total Count

This program is used to display the total counts, including counts of the copier, document feeder, duplex module, and stapler.

An A3 (11" x 17") copy is counted as two copies.

Covers and transparency inserts are counted as one copy even if they are blank.

The lists printed with the key operator programs are included in “OTHERS”. When the “TOTAL COUNT.” key is pressed, the following display will appear.

KEY OPERATOR PROGRAMS

TOTAL COUNT.	OK
COPIES	: 022,500
DOCUMENT	: 012,000
FEEDER	: 007,500
DUPLEX
STAPLER	: 003,000
OTHERS	: 000,500
	PRINT

The total counts for all units in use will be displayed.

To print these counts, press the “PRINT” key.

Press the “OK” key to exit the program.

Program List Printout

This program is used to print out the list of available key operator programs.

Press the “PROGRAM LIST PRINTOUT.” key.

●The copier will start printing. To stop printing after starting, press the “CANCEL” key.

KEY OPERATOR’S GUIDE8

Key operator programs CHAPTER

8-30