Sharp AR-507 8-15, Key Operator Programs, To set a limit for all accounts, Press the “ENTER” key

KEY OPERATOR PROGRAMS

2.Enter the upper limit (max. 999,999) for the account.

●If a limit for the account has been already set, the limit will be displayed. Press the CLEAR ( C ) key before entering a new upper limit.

●To cancel a limit, press the CLEAR ( C ) key and proceed to step 3 without entering a limit.

3.Press the “ENTER” key.

4.To limit other accounts, repeat steps 1 to 3. Press the “OK” key to exit the program.

To set a limit for all accounts

1.Press the “LIMIT” (ALL ACCOUNTS) key on the touch panel.

●“ALL” will appear under “ACCOUNT NUMBER”.

2.Enter the upper limit (max. 999,999) for all accounts.

●To cancel the limit for all accounts, proceed to step 3 without entering a limit.

3.Press the “ENTER” key.

4.Press the “OK” key to exit the program.

Account Number Security

This program is used to make it difficult for users to gain access to accounts by entering code numbers through trial and error. If this program is selected and an operator enters three successive invalid account numbers, the copier will not accept another number for one minute and the message “PLEASE SEE YOUR KEY OPERATOR FOR ASSISTANCE.” will appear.

To enable the account number security function, press the check box of “ACCOUNT NUMBER SECURITY.” to display a check mark in the check box.

To disable this function, press the check box of this program again to clear the check mark in the check box.

KEY OPERATOR’S GUIDE

Key operator programs

CHAPTER8

8-15