Sharp AR-507 3-24, Image Editing Functions, Repeat Copy, Press the START key, on the touch panel

IMAGE EDITING FUNCTIONS

	INTERRUPT	CLEAR ALL
		CA
		START
	CLEAR
	C
CHAPTER3	PLACE NEXT ORIGINAL. PRESS [START].

WHEN FINISHED, PRESS [READ-END].

READ-END

8	Press the START ( ) key.
	● If the document feeder is used, scanning of originals and copying

will start.

●If the document glass is used in the SORT mode, proceed to the next step.

Replace the finished original with the next original after

9 the START () key indicator lights up, and then press the START () key. Repeat this step until all originals have been scanned. Then, press the “READ-END” key

SPECIAL FUNCTIONS Image editing functions

AUTO	A3
EXPOSURE	PAPER SELECT

REPEAT COPY

C

B

100%

COPY RATIO

C	C
B	B
C	C
B	B

on the touch panel.

●Copying will start at this time.

●Up to 120 sheets of A4 (8-1/2" x 11") originals or up to 60 sheets of originals larger than A4 (8-1/2" x 11") can be scanned.

●To cancel the CENTRING function, press the “CENTRING” key again on the IMAGE EDIT menu screen.

REPEAT COPY is used to produce repeated images of an original on a single sheet of paper. Border lines can be drawn to separate repeated images.

●Up to 16 (4 x 4) copies can be made on a single sheet.

●When a standard size original is copied onto a standard size paper, copy ratio will be automatically calculated based on the original size and the number of the images required in single sheet of paper. When the copier cannot detect the size of original, however, copy ratio will be automatically set to 100%.

●If the proper reduction ratio is calculated as less than 25%, part of the original will not be copied. In that case the reduction ratio will be set to 25% showing the following message on the display. “IMAGE DOES NOT FIT INTO THE IMAGE AREA. COPY RATIO WILL BE SET TO 25%.”

Place the originals in the document feeder tray or on the

1 document glass.

3-24