Sharp AR-507 3-16, Transparency Film With Insert Sheets, Press the upper “OK” key, AUTO A4, 1. A4

Indicate whether the insert sheets are to be copied on or not.

● Select “YES” or “NO” on the touch panel.

TRANSPARENCY FILM WITH INSERT SHEETS

OK

CANCEL OK OK

PRINT ON THE INSERT		OK
SHEETS?
YES	THE INSERT
NO

CHAPTER3

4

5 Press the upper “OK” key.

6 Load transparency film into the bypass tray.

SPECIAL FUNCTIONS Transparency film with insert sheets

	ORIGINAL A4
	A4
1. A4	106~200g/m2
2. A3
AUTO A4	100%
PAPER SELECT	COPY RATIO
INTERRUPT	CLEAR ALL

CA

START

CLEAR

C

PLACE NEXT ORIGINAL. PRESS [START]. WHEN FINISHED, PRESS [READ-END].

		READ-END
AUTO	AUTO A4	100%
EXPOSURE	PAPER SELECT	COPY RATIO

7	Ensure that the desired tray is selected for insert sheets.
	● The copy paper for insert sheets must be the same size as the

transparency film.

8	Make all other selections and press the START ( ) key.
	● If the document feeder is used, scanning of originals and copying

will start.

●If the document glass is used in the SORT mode, proceed to the next step.

Replace the finished original with the next original after

9 the START () key indicator lights up, and then press the START () key. Repeat this step until all originals have been scanned. Then, press the “READ-END” key on the touch panel.

●Copying will start at this time.

●Up to 120 sheets of A4 (8-1/2" x 11") originals or up to 60 sheets of originals larger than A4 (8-1/2" x 11") can be scanned.

●When copying is completed, remove remaining transparency film.

●To cancel the TRANSPARENCY INSERTS function, select the TRANSPARENCY INSERTS function again and press the “CANCEL” key.

3-16