Sharp AR-507 operation manual Specifications, Copier

CHAPTER6
Specifications	GENERAL INFORMATION

SPECIFICATIONS

COPIER

Type	Desktop
Copy system	Dry, electrostatic transfer system
Originals	Sheets, bound documents
Original feed system	Reversing single pass feeder (RSPF)
Original sizes	Max. A3 (11" x 17")
Copy sizes	Max. A3 (11" x 17"), min. A6 (5-1/2" x 8-1/2")
	Image loss:		Max. 5 mm (13/64")
			(both leading and trailing edges)
			Max. 5 mm (13/64")
			(along all other edges in total)
	For paper weight, see page 4-2.
Copying speed	50 copies/min. (A4 (8-1/2" x 11"))
(at 100% copy ratio)	35 copies/min. (A4R (8-1/2" x 11"R))
	29 copies/min. (B4 (8-1/2" x 14"))
	25 copies/min. (A3 (11" x 17"))
Continuous copy	Max. 999 copies; subtractive counter
First-copy time*	Approx. 4.3		sec.
Warm-up time	Less than 150 sec.
Copy ratio	Variable: 25 to 400% in 1% increments, total 376 steps
	(can be set in the horizontal and vertical directions
	independently)
	Fixed presets: 25%, 50%, 70%, 81%, 86%, 100%, 115%, 122%,
	141%, 200%, 400% (25%, 50%, 64%, 77%, 95%, 100%, 121%,
	129%, 141%, 200%, 400%)
Exposure system	Document glass: Moving optical source (stationary platen) with
			automatic exposure function
	RSPF:		Moving original
Copy paper feed	Two paper trays with automatic paper feed (500 sheets each);
	one bypass tray with 50-sheet automatic feed capability
Fusing system	Heat rollers
Developer system	Magnetic brush development
Light source	Xenon lamp
Resolution	Scan:	400 dpi
	Output: 600 dpi
Gradation	Scan:	256 levels
	Output: 2 levels (normal copying)
Required power supply	Local voltage ±10% (For this copier’s power supply requirements,
	see the name plate located on the left hand side at the rear corner of
	the copier.)

* When the copier is in the noise level reduce mode, the first copy time will be several seconds longer.

6-8