Sharp AR-507 KEY Operator Assistance Call, Finisher is OUT of SERVICE. Press CA to Cancel JOB

KEY OPERATOR ASSISTANCE CALL

When the copier is in need of service or care not usually performed by general users, the copier will stop and one of the following messages listed below will appear.

Message Remedy

CHECK STAPLER POSITION OR STAPLE JAM. See page 7-12 for staple jam removal. If the trouble cannot be easily remedied, use key operator program “DISABLING OF STAPLER” (page 8-28) to prevent the use of the stapler.

Contact your authorised Sharp Service Centre for service.

THE FINISHER IS OUT OF SERVICE. PRESS [CA] TO CANCEL JOB.

Contact your authorised Sharp Service Centre for service. (This message will appear when an optional finisher (AR- FN3) malfunctions.)

DUPLEX SYSTEM IS OUT OF SERVICE. Use key operator program “DISABLING OF DUPLEX COPYING” (page 8-27) to prevent the use of the duplex system. Contact your authorised Sharp Service Centre for service.

THE DOCUMENT FEEDER IS OUT OF SERVICE. PRESS [CA] TO CANCEL JOB.

Use key operator program “DISABLING OF DOCUMENT FEEDER” (page 8-27) to prevent the use of the document feeder. Contact your authorised Sharp Service Centre for service.

SELECTED PAPER TRAY IS OUT OF SERVICE. Contact your authorised Sharp Service Centre for service.

PLEASE SELECT ANOTHER PAPER TRAY.

CALL FOR SERVICE. CODE:	With this message, an alphanumeric code will appear to
	indicate a malfunction has occurred which cannot be
	corrected by the key operator.
	Contact your authorised Sharp Service Centre for service.
	Be sure to report the alphanumeric code information as
	well. This will enable the Service Centre to prepare to
	correct the malfunction associated with the code.

KEY OPERATOR’S GUIDE

Key Operator assistance call

CHAPTER8

8-31