Cool-Lux A100 manual Using the microphone, Diskettes

OPERATING BASICS

User’s Manual

3.Do not write on, apply a sticker to, or otherwise mark the surface of the CD/ DVD that contains data.

4.Hold the CD/DVD by its outside edge or the edge on the center hole. Fin- gerprints on the surface can prevent the drive from properly reading data.

5.Do not expose to direct sunlight, extreme heat or cold. Do not place heavy objects on your CD/DVDs.

6.If your CD/DVDs become dusty or dirty, wipe them with a clean dry cloth. Wipe from the center out, do not wipe in a circular direction around the CD/ DVD. If necessary, use a cloth dampened in water or a neutral cleaner. Do not use benzine, thinner or similar cleaner.

Diskettes

1.Store your diskettes in the container they came in to protect them and keep them clean. If a diskette is dirty, do not use cleaning fluid. Clean it with a soft damp cloth.

2.Do not slide back the diskette’s protective metal covering or touch the dis- kette’s magnetic surface. Fingerprints may prevent the diskette drive from reading data from the diskette.

3.Data may be lost if the diskette is twisted; bent; or exposed to direct sun- light, extreme heat or cold.

4.Do not place heavy objects on your diskettes.

5.Do not eat, smoke, or use erasers near your diskettes. Foreign particles inside the diskette’s jacket can damage the magnetic surface.

6.Magnetic energy can destroy the data on your diskettes. Keep your diskettes away from speakers, radios, television sets and other sources of magnetic fields.

Using the microphone

Your computer has a built-in microphone that can be used to record monaural sounds into your applications. It can also be used to issue voice commands to applications that support such functions.

Since your computer has a built-in microphone and speaker, “feedback” may be heard under certain conditions. Feedback occurs when sound from the speaker is picked up in the microphone and amplified back to the speaker, which amplifies it again to the microphone.

This feedback occurs repeatedly and causes a very loud, high-pitched noise. It is a common phenomenon that occurs in any sound system when the microphone

4-22