HW SETUP AND PASSWORDS
User’s Manual
To change the boot drive, follow the steps below.
1.Hold down F12 and boot the computer.
2.Use the up/down cursor keys to select boot device you want and press
Enter.
NOTES: 1. If a supervisor password is set, the menu above does not appear when you use the user password to start the computer.
2.The selection method above does not change the boot priority settings in HW Setup.
3.If you press a key other than one of those above or if the selected device is not installed, the system will boot accord- ing to the current setting in HW Setup.
Keyboard
Wake-up on Keyboard
When this feature is enabled and the computer is in standby mode, you can turn on the computer by pressing any key. It is effective only for the internal keyboard and only when the computer is in standby mode.
Enabled Enables
USB
USB KB/Mouse Legacy Emulation
Use this option to enable or disable USB KB/Mouse Legacy Emulation. If your operating system does not support USB, you can still use a USB mouse and key- board by setting the USB KB/Mouse Legacy Emulation item to Enabled.
Enabled Enables the USB KB/Mouse Legacy Emulation. (Default)
Disabled Disables the USB KB/Mouse Legacy Emulation.
