Cool-Lux A100 manual When writing or rewriting

Writing CD/DVDs on DVD Super Multi (+-R Double Layer) drive

◆Operate the computer in the full-power mode. Do not use power-saving fea- tures.

◆Format 4 is not supported.

◆Do not write while virus check software is running. Wait for it to finish, and then disable virus detection programs including any software that checks files automatically in the background.

◆Do not use hard disk utilities, including those intended to enhance HDD access speed. They may cause unstable operation and data damage.

◆Write from the computer’s HDD to the CD/DVD. Do not try to write from shared devices such as a LAN server or any other network device.

◆Writing with software other than RecordNow! is not recommended.

When writing or rewriting

Please observe/consider the following when you write or rewrite to a CD-R/RW, DVD-R/-R DL/-RW/-RAM or DVD+R/+R DL/+RW disc.

◆Do not perform any of the following actions:

◆Change users in the Windows XP operating system.

◆Operate the computer for any other function, including use of a mouse or Touch Pad, closing/opening the LCD panel.

◆Start a communication application such as a modem.

◆Apply impact or vibration to the PC.

◆Install, remove or connect external devices, including the following: PC card, USB devices, external display, i.LINK devices, optical digital devices.

◆Use the Audio/Video control button to reproduce music or voice.

◆Open the CD-RW/DVD-ROM or DVD Super Multi (+-R Double Layer) drive.

◆Do not use shut down/log off and standby/hibernation while writing or rewriting.

◆Make sure writing or rewriting is completed before going into standby/ hibernation. Writing is completed if you can open the CD-RW/DVD-ROM or DVD Super Multi (+-R Double Layer) drive tray.

◆Set the computer on a level surface and avoid places subject to vibration such as airplanes, trains, or cars. Do not use an unstable surface such as a stand.

OPERATING BASICS

4-15