Configuring your Camera

Firmware Features

A few specialized features are built into the firmware and are only available

 

with a key.

 

To enable a firmware feature on your camera you must first purchase a kit

 

containing instructions and a certificate number (one kit for each camera

 

where firmware features are to be enabled). The included instructions

 

describe how to enable the feature on your camera.

Folder and File Naming

You can choose how to number files and folders on the camera. You can also specify the maximum number of changes allowed in a folder. Continuous—Names are assigned in a continuous sequence and are not reset to 0 when a new card is inserted.

Auto Restart—Names are reset to 0 when a new card is inserted. Manual Restart—Names are reset to 0 on the current card or cards when you press the OK button.

Folder Limit—When the specified folder limit has been reached, no more images will be saved in a folder.

1.Choose Folder/File Name from the Tools menu, then highlight Continuous, Auto Restart, Manual Restart, or Folder Limit.

2.If you chose Folder Limit, choose 100 or 10000.

3.Press the OK button.

NOTE: You can also create and name new folders (see page 6-10).

April 29, 2004

5-7

Page 71
Image 71
Kodak DCS Pro SLR/n manual Folder and File Naming, Firmware Features, With a key