Configuring your Camera

Manual

1.Choose Lens Optimization from the Capture menu, then choose Manual.

2.Press the right side of the Four-way switch to display the edit boxes.

3.Press the right or left side of the Four-way switch to highlight a box. Press the top or bottom of the Four-way switch to change a value.

NOTE: The strength must be between zero and 99.

4. Press the OK button.

Select a Lens from the User List

Once you add a lens to the user list (see page 5-31) or define a new lens (see page 5-35), you can select it.

1.Choose Lens Optimization from the Capture menu, then choose a lens.

2.Press the OK button.

NOTE: Most long lenses require a correction strength of zero. Select the >85mm option for these lenses. This is more convenient than adding all your long lenses to the user list. If you have a long lens that requires a non zero strength, add it to your user list.

April 29, 2004

5-29

Page 93
Image 93
Kodak DCS Pro SLR/n manual Configuring your Camera Manual, Select a Lens from the User List