Connecting to Your Computer

Quitting—Disconnecting from the Computer

Complete these steps when your work with the camera and the computer is complete.

You can connect or disconnect the camera without turning the camera or the computer off.

NOTE: WINDOWS Operating System only: Do not disconnect the camera from the computer while KODAK PROFESSIONAL DCS Camera Manager is running. Doing so can cause your computer to "hang".

CAUTION:

Do not disconnect the camera from the computer while images are being transferred from the camera to the computer. Doing so can corrupt images on the computer.

1.Exit KODAK PROFESSSIONAL DCS Photo Desk software if is running.

2.Disconnect the camera from the computer.

Using the Card Reader

If your computer has a card reader, you can access images by placing a memory card containing camera images in the reader. If you have a new card reader, install it using the instructions accompanying the reader.

1.Remove the memory card from your camera.

2.Insert the memory card into the card reader on your computer.

CAUTION:

Do not remove a card from the card reader while KODAK PROFESSIONAL DCS Photo Desk is running. If images on the card are open in DCS Photo Desk, removing the card can cause you to lose data.

13-4

April 29, 2004

Page 200
Image 200
Kodak DCS Pro SLR/n manual Quitting-Disconnecting from the Computer, Using the Card Reader