Kodak DCS Pro SLR/n manual Setting ISO using Image LCD, Setting ISO using Camera Controls

Configuring your Camera

ISO

ISO determines the sensitivity of the camera system to light. Increasing or decreasing the ISO increases or decreases sensitivity.

You can change ISO settings in 1/3 stop increments using the Main-Command dial.

You can set ISO using the Image LCD (see below) or using camera controls (see page 5-24).

Setting ISO using the

Image LCD

1.Choose ISO from the Capture menu, then choose the desired setting.

2.Press the OK button.

Shortcut:

•You can also access this function using the Digital Status LCD shortcut (see page 2-16).

Setting ISO using Camera

Controls

1. Set the Exposure Mode dial to ISO.

2. Rotate the Main-Command dial to choose the desired setting.

5-24 April 29, 2004