Kodak DCS Pro SLR/n manual Using the Built-in Speedlight

Using the Built-in Speedlight

Flash Photography

Follow these instructions when using a G-type or D-type AF NIKKOR lens.

NOTE: Continuous Shooting Drive mode cannot be used in flash photography.

1.Set the Metering system to Matrix or Center-Weighted metering ( see page 7-8).

2.Press the Flash Lock-Release button to release the Built-In Speedlight.

The Speedlight starts to charge when it is released.	appears in the
viewfinder when it is fully charged.

NOTE: To conserve power when the Speedlight is not in use, close it by pressing the Speedlight down gently until it clicks in place.

3.Press and hold and rotate the Main-Command dial to set the Flash Sync mode.

4.Set the Exposure mode (see page 7-10) and confirm shutter speed and aperture.

NOTE: Automatic Balanced Fill-Flash for Digital SLR is executed when you set Exposure mode to Programmed Auto, Shutter-Priority Auto, or Aperture-Priority Auto. Standard TTL Flash for Digital SLR is executed when you set Exposure mode to Manual.

April 29, 2004 10-3