![](/images/new-backgrounds/1189386/1893869x1.webp)
For optimal reception, keep the cover open at a ninety degree angle.
Closing the cover will block the intenna, minimizing network access.
PRODUCT FEATURES
•Power management: The UML290 utilizes power management and system overhead reduction functions provided by the USB interface for maximum power savings.
•Antenna design: Efficient, innovative internal antenna design optimizes data transfer rate and sensitivity to network signals.
•Extension Cable: Simply insert the USB connector into the USB port of your computer to increase RF performance and to solve clearance issues.
•USB Modem that supports Type A USB Port interface.
Important: Note that the USB Modem MUST be connected to USB interfaces USB 2.0 or higher. The connection to the
•LTE(700)+ EVDO Rev.A(800/1900)
•Utilizes QUALCOMM MDM 9600 chip set.
•Supports 4G and 3G network technologies.
•Data Speeds
LTE bands : Typical download speeds of up to 25 to 50 Mbps in Mobile Broadband coverage area.
CDMA bands: Typical download speeds of 600 Kbps to 1.4 Mbps and upload speeds of 500 to 800 Kbps in Mobile Broadband coverage area.
•Supports Windows XP, Vista and 7 systems with installed host software and driver.
BEFORE USING UML290 ![](/images/new-backgrounds/1189386/1893869xi3.webp)
PRODUCT HANDLING
1.Do not put any adhesive label on the USB connector. It may leave a sticky residue that can cause problems inside the computer USB port.
2.The UML290 USB device should easily slide into the USB port. Do not force the UML290 into the USB port as it may cause damage to the modem and/or the port.
3.Keep the UML290 in a dry and clean place.
(Storage temperature:
CONFIGURATION
To use the UML290, you should first install the software included in the Installation CD and configure the UML290 USB device. See the next section for more information on software installation and USB device configuration.
6 |
| 7 |
|