Kodak DCS Pro SLR/n manual Correcting Digital Exposure Exposure Bias

Correcting Digital Exposure

Exposure Bias

Setting up Cards, Folders, and Files

Use Digital Exposure Correction to correct errors in exposure.

This feature helps correct errors but is not a substitute for proper exposure settings (shutter speed, aperture, and ISO).

NOTE: Digital Exposure Correction is not to be confused with Exposure Compensation (see page 7-19) which modifies exposure.

Digital Exposure Correction is applied to JPEG images on the camera. It is not applied to Raw images on the camera. Rather, the information is saved and applied when the images are processed in the DCS Photo Desk software. (You can also change the setting in the DCS Photo Desk software.)

1.Choose Digital Exp. Cor. from the Image menu, then highlight Off or On.

2.Press the OK button.

If you use more than one KODAK PROFESSIONAL DCS Pro SLR/n Digital Camera in your studio, you may want to adjust the exposure so that all of your cameras produce consistent output. You can set the Exposure Bias in -0.5 to +0.5 in 1/10 stop increments. Exposure Bias is applied to JPEG images on the camera. It is not applied to Raw images on the camera. Rather, the information is saved and applied when the images are processed in the KODAK PROFESSIONAL DCS Photo Desk software

1.Choose Exposure Bias from the Image menu, then highlight the desired setting.

2.Press the OK button.

April 29, 2004 6-15