Kodak DCS Pro SLR/n manual Serial In Mode

Serial Data Collection and Global Positioning System

Serial In Mode	Using Serial In mode, your camera accepts text strings from a connected
	external device. The information is then added to specified image headers.
	Serial In and Serial Out modes can work simultaneously.
	NOTE: The Scan-Shoot and Scan-Shoot Multi features allow connectivity
		of serial bar code scanners. To enable, please contact your dealer
		of Kodak products.
		1. Choose Serial Port from the Tools menu then choose Serial In.
		2. Select a Serial In option, described below.
		Menu	Action	Comments
		Choice
		None	No data transmitted	Serial port is unavailable.
		GPS	A text string from the	If a TRIMBLE GPS card is
			connected GPS device is	inserted in the camera, the
			written to the header of the	TRIMBLE card overrides the
			just-captured image.	serial port GPS functionality.
		New	The text string from the	Text string must be 250 valid
			connected device is written	characters, or less. Valid
			to the header of	characters consist of ASCII
			subsequent images.	characters, carriage return,
				and line termination.
		Previous	A text string from the	When you select New Images
			connected device is written	or Previous Image, a Serial In
			to the header of previously	Status option becomes
			captured images.	available.
		Scan-Shoot	A scanned bar code value is	File type must be Raw. Select
			written to the image	Scan-Shoot, scan a bar code,
			header.	then capture an image.
		Scan-Shoot	Up to eight scanned bar	File type must be Raw. Select
		Multi	code values are written to	Scan-Shoot Multi, scan up to
			the image header.	eight bar codes, then capture
				an image.
		Status	This option appears when	See page 15-3.
			you select New or Previous.

15-2 April 29, 2004