Kodak DCS Pro SLR/n manual Problems Indicated in the Top Status LCD

Appendix C: Troubleshooting

In addition to the issues described in this section, the following Web page provides answers to many of your questions: http://www.kodak.com/go/DCS.

Problems Indicated in the Top Status LCD

Top Status LCD	Viewfinder	Cause	Remedy
fEE blinks	fEE blinks	Lens is not set to its minimum	Set lens to minimum aperture.
		aperture.
fEE blinks	P blinks	Attached Speedlight is not set at TTL	Set the Speedlight flash mode to
		Auto Flash in P mode.	TTL, or set the Exposure mode to S,
			A, or M.
appears	—	Battery is low.	Have fresh battery ready.
blinks	—	Battery needs to be charged.	Remove the battery and charge it.
—	blinks	Autofocus is not possible.	Focus manually.
HI appears	HI appears	Overexposure warning (subject is	In P mode, use an ND filter.
		too bright).	In S mode, select a faster shutter
			speed.
			In A mode, select a smaller
			aperture (larger f-number).
			(If the warning indications remain
			after trying the remedy in S or A
			mode, use an ND filter.)

April 29, 2004 C-1