Power line frequency, Video orientation | Siemens CCIC1410 instruction

Configuration with the CCIC1410 Homepage

Power line frequency:

Select the appropriate power line frequency for your location to eliminate image flickering. Note that after the power line frequency is changed, it is required to disconnect and reconnect the power cord of the network camera in order for the new setting to take effect.

Video orientation:

"Flip" vertically reflects the display of the live video. "Mirror" horizontally reflects the display of the live video. Select both options if the network camera is installed upside-down (e.g. on a ceiling) to correct the image orientation.

Maximum exposure time:

1/30 S, 1/15 S, and Auto.

Overlay title and time stamp on video:

Select this option to insert the video title and time in the video stream. Note that when the image size is set to 176 x 144, only the time will be stamped on video streams.

Image Settings

Click Image Settings to open the image settings page. In this page, you can fine- tune white balance, brightness, saturation, contrast, and sharpness for video compensation.

–	Brightness:
	Adjust the image brightness level, which ranges from -5 to +5. The default value
	is set to 0.
66

Siemens Building Technologies
Fire Safety & Security Products	05.2009

Image 66

Siemens CCIC1410 Power line frequency, Video orientation, Maximum exposure time, Overlay title and time stamp on video

Contents

Mjpeg / MPEG4 Contacting us About this documentTrademarks Training courses Contents 11.1 Installation of the device SafetyGeneral safety precautions Target readers Service and maintenance Cleaning of the deviceSoftware Meaning of the written warning notices Cmos characteristicsMeaning of the hazard symbols Damage due to improper storage of CD Directives and standards For CCIC1410-L and CCIC1410-LAFor CCIC1410-LAW National restrictions Restrictions for France Declaration of conformity Specification CCIC1410-L Image system Technical dataDimensions Product specifications Electronics Network ConnectorPower supply Environment Package contents Ordering data Description of the equipment Versions of the camera Front and rear views of the camera Pin definitions of input/output only CCIC1410-LA, -LAW Connection method LED status Hardware reset RebootRestore Installation Network setup Internet connection via a router Internet connection with static IP Internet connection via PPPoE Point-to-Point over Ethernet CCIC1410 Installation Wizard Set up the CCIC1410 Installation Wizard CCIC1410 Installation Wizard Open the CCIC1410 Installation Wizard User interface of the CCIC1410 Installation Wizard Select a device for the configuration System settings Open the system settingsRefreshing the device list and linking to the devices Change administrator password Change host name Network settings Adjust date and timePPPoE setting LAN setting Dhcp or fixed IP Wireless setting Mobile accessWireless Settings page appears Wireless mode Auth. Mode None Key length Key format Hexadecimal or Ascii Apply settings to selected device Access via Internet Access informationAccess from Home Access from Quicktime/Cellphone UPnP status Wireless statusNetwork type Ddns status Add to my favorite MPEG4 media options Client settingsStream options MPEG4 protocol options transmission modes UDP multicast 4 MP4 saving options storing destination and file nameUDP unicast File name prefix Add date and time suffix to the file name Using your Web Browser Configuration with the CCIC1410 HomepageUsing the CCIC1410 Installation Wizard Opening the CCIC1410 Homepage User interface of the CCIC1410 Homepage Tabs of the CCIC1410 Homepage Live video window of CCIC1410 Homepage with MPEG4 mode Live video window of the CCIC1410 Homepage Video and audio control buttons Digital zoom edit VolumeVolume at your local computer Start / Stop recording Live video window of CCIC1410 Homepage with Mjpeg mode Mjpeg protocol and media options System Settings for network cameraTurn off the LED indicator Host name name for the network camera Disable privacy button Time zone of system system timeDaylight saving time Mark the checkbox Enable daylight saving time Option Description Digital input and digital output Root password SecurityAdd users Manage users Network connection settings Network type Enable UPnP port ForwardingPPPoE PPPoE Point-to-point protocol over Ethernet Primary stream port / Secondary stream port AuthenticationHttp Stream name 3 FTP Rtsp streaming Access name for stream 1 / Access name for stream Wireless LAN settings CCIC1410-LAW only Ssid Service Set Identifier TX rate Wireless modeChannel Security Default Key Network Key Security WEP Wired equivalent PrivacyAuthentication mode Key format Pre-shared Key WPA-PSKAlgorithm WPA2-PSK Enable Ddns Ddns settingsAccess list Provider Allowed List and Denied List Delete allowed list / Delete denied listDenied List section Audio and video settings Video settingsColour Video orientation Power line frequencyImage Settings Maximum exposure time Privacy mask Video quality settings for stream 1 / stream Jpeg MPEG-4 Audio settings Internal microphone input gainAudio type Motion detection settings Enable motion detection Application settings Event settings Event name Trigger Event Schedule Media Settings Media name Media Type Snapshot Video clip Server settings System log Server name Server Type Mail Alarm server System logRemote log View parameters Current log Maintenance RebootRestore Upload / export daylight saving time configuration file Export daylight saving time configuration file Configuration with the CCIC1410 Homepage Upload Daylight Saving Time Configuration File Using Rtsp players Accessing the video streamsVia the CCIC1410 Installation Wizard Via Internet Viewing Mjpeg streaming media Http//ipaddress80/ cgi-bin/liveimage Using 3GPP-compatible mobile devices Video Mode Upgrade firmware Using the CCIC1410 HomepageUsing the CCIC1410 Installation Wizard Upgrade firmware Upgrade firmware Upgrade firmware Index Fixed ~Page A6V10236594