Siemens CCIC1410 Enable UPnP port, Forwarding, PPPoE PPPoE Point-to-point protocol over Ethernet

Configuration with the CCIC1410 Homepage

Enable UPnP port	To access the network camera from the
forwarding	Internet, select this option to allow the network
	camera to open ports on the router
	automatically so that video streams can be
	sent out from a LAN. To utilize this feature,
	make sure that your router supports UPnP™
	and it is activated.
PPPoE PPPoE (Point-to-point protocol over Ethernet)
Select this option to configure your network camera to make it accessible
from anywhere as long as there is an Internet connection. Note that to
utilize this feature, it requires an account provided by your ISP.

Proceed as follows to acquire your network camera’s public IP address.

1.Set up the network camera in LAN.

2.Go to Configuration > Application > Server Settings (please refer to Server Settings in chapter 9.13 Application settings) to add a new server -- email or FTP server.

3.Go to Configuration > Application > Media Settings (please refer to Media Settings in chapter 9.13 Application settings). Select System log so that you will receive a list of system logs in TXT file format containing the network camera’s public IP address on your email or FTP server.

4.Go to Configuration > Network > Network Type. Select PPPoE and enter the user name and password provided by your ISP. Click Save for your changes to take effect.

5.The network camera starts to reboot.

NOTE:

If the default ports are already used by other devices connecting to the same router, the network camera will select other ports.

If UPnP™ is not supported by your router, you will see the following message:

Error: Router does not support UPnP forwarding.

54

Siemens Building Technologies
Fire Safety & Security Products	05.2009