Configuration with the CCIC1410 Homepage
Select to send the media to an FTP server when a trigger is activated.
ÎServer address:
Enter the domain name or IP address of the FTP server.
ÎServer port:
By default, the FTP port server is set to 21. Also, it can be assigned another port number between 1025 and 65535.
ÎUser name:
Enter the login name of the FTP account.
ÎPassword:
Enter the password of the FTP account.
ÎRemote folder name:
Enter a folder in which to save the media file. If the folder name does not exist, the network camera will create one on the FTP server.
ÎPassive mode:
Most firewalls do not accept new connections initiated by external requests. If the FTP server supports passive mode, select this option to enable passive mode FTP and allow data transmission to pass through the firewall.
To verify if the FTP settings are correctly configured, click Test. The result will be shown in a
–HTTP:
Select to send the media to an HTTP server when a trigger is activated.
ÎURL:
Enter the URL of the HTTP server.
ÎUser name:
Enter the user name.
ÎPassword:
Enter the password.
To verify if the HTTP settings are correctly configured, click Test. The result will be shown in a
–Alarm server:
Select to send a message to a specified port address. Î Alarm Server IP Address:
Enter the target IP address.
ÎAlarm Server Port Number: Enter the target port number.
9.14System log
This section explains how to configure the network camera to send the system log to a remote server as a backup. The system log is composed of the following two columns: Remote Log and Current Log.
9.14.1 Remote log
| You can configure the network camera to send the system log file to a remote | |
| server as a log backup. Before utilizing this feature, it is recommended to install a | |
| 81 | |
|
|
|
Siemens Building Technologies |
|
|
Fire Safety & Security Products | 05.2009 | |
