Siemens CCIC1410 configurationmanual Access name for stream 1 / Access name for stream

Configuration with the CCIC1410 Homepage

The accessibility of the RTSP streaming for the three authentication modes is listed in the following table:

O indicates that the authentication mode is supported by the RTSP player.

X indicates that the authentication mode is NOT supported by the RTSP player.

Access name for stream 1 / Access name for stream 2:

The access name is used to select the streaming source. When using an RTSP player to access the network camera, and the video mode is set to MPEG4, use the following RTSP URL command to request a transmission of streaming data: rtsp://<ip address>:<rtsp port>/<access name for stream1 or stream2>

For example, when the access name for stream 1 is set to live.sdp:

1.Launch an RTSP player.

2.Choose File > Open URL.

ÎAn URL dialog box will pop up.

3.Type in the URL command in the text box. For example: rtsp://192.168.5.129:554/live.sdp

ÎThe live video will be displayed on your player.

RTSP port /RTP port for video, audio/ RTCP port for video, audio

The RTSP (Real-Time Streaming Protocol) controls the streaming media. By default, the port number is set to 554.

The RTP (Real-time Transport Protocol) is used to deliver video and audio data to the clients. By default, the RTP port for video is set to 5556 and the RTP port for audio is set to 5558.

The five ports can be changed between 1025 and 65535. The RTP port must be even-numbered and the RTCP port is always the RTP port number plus one, and must thus always be odd-numbered. When the RTP port changes, the RTCP port will change accordingly.

If the RTP ports are incorrectly assigned, a warning message is displayed.

58

Siemens Building Technologies
Fire Safety & Security Products	05.2009